60mm Stove Flue Pipe Connections
60mm Stove Flue Pipe Connections
Prix habituel
€172,95 EUR
Prix habituel
Prix promotionnel
€172,95 EUR
Prix unitaire
/
par
60mm Single Wall Stove Flue Pipes
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
This flue pipe and accessory set will fit Little Burners: Warehouse Lenny Burner.
Internal Cover Plate
- 150mm x 75mm (x2), 70mm hole diamater for flue pipe to sit through. 8 screw holes (4.5 diameter), black screws included.
- 0.8mm mild steel - black.
Rain Cap
- 6x Nuts and bolts included.
Operating temperature - Rubber Silicone Boot
- Safe operating 200° degrees - Max 225 ° (Short period of time).
- A flashing kit should be installed with a minimum distance of 110-120cm from the stove to allow sufficient cooling.
- Always wear gloves when installing the kit. May have sharp edges on the inner plate.
- We recommend cutting the product 20-30% smaller than the pipe to ensure a perfectly tight seal
We do not accept any liability for loss or damage incurred by the use of the flashing kit howsoever caused.
Please note that fittings do not provide a watertight fit. High heat seals, tapes, and lubricants should be used when fitting to prevent water from entering.
Share
t
tom fawcett Not fitted to camper yet, but looks neat little unit. Looking forward to cold winter’s night.
T
Trevor Bradley When buying I thought the parts I ordered were a bit on the expensive side, but when they arrived, they are well made and well worth the money.